Vast distances, remote locations, and extensive single-track sections combine to pose significant challenges for rail operators on Australia’s interstate freight network.
Fuel sits near the top of the cost sheet on every journey, making technology that supports burn reduction an attractive proposition. So is improving the in-cab information available to drivers as they work, however isolated their location may be.
Australian freight operators do not need to look far to see what could be achieved by using Driver Advisory System (DAS) technology.
Across the Tasman, KiwiRail introduced Zelra’s DAS in 2015 and operates the system across 180 locomotives with 350 drivers. KiwiRail’s data shows DAS helps deliver an ongoing fuel reduction of 13.5 per cent, saving 17 million litres of diesel over a five-year period.
Zelra is headquartered in Brisbane. The physics-based algorithm at the core of its DAS guidance was developed through an ongoing 30-year collaboration between train performance research academics at Adelaide University and Zelra’s research and development team.
We spoke with Michael Zink, Managing Director of Zelra, to find out what DAS delivers for KiwiRail and how it could work for freight operators in Australia.
“Zelra’s Driver Advisory System, or DAS, acts as a real-time decision-support tool for train drivers,” Mr Zink said.
“It uses route data, train performance characteristics, timetable information, speed restrictions, and onboard positioning data to continuously calculate energy-efficient driving advice. This guidance is shared with the driver throughout the journey via an in-cab tablet or screen.
“The objective is not to control the train. It is decision support helping drivers to achieve their planned schedule while using less fuel and reducing unnecessary braking and acceleration.”
For KiwiRail, DAS runs as a standalone platform. It takes information about the train and the railway it is travelling over, combining it into driving advice for that specific journey.
“Behind the in-cab unit sits our back-office system. That holds the route, timetable, train, driver, and speed restriction data the platform works from. It also collects the journey logs that feed reporting and analysis,” he said.
“In practical terms, DAS helps translate complex operating conditions into actionable guidance that supports more consistent driving, improved fuel efficiency, and safer speed management.”
Interstate freight spends many hours in country where mobile coverage comes and goes, which raises a question about what happens to the driving advice when the signal drops.
“DAS advice is calculated on the train,” Mr Zink explained. “Route, timetable, train performance, and speed restriction data are all held on the device within the train, and position comes from GPS. None of that requires a connection.
“Connectivity does two other jobs. It carries updated data down to the train, and it carries the journey logs back for analysis. Data transfer is event driven, so the system synchronises when it finds a connection, queues what it can’t send, and picks up again when coverage returns.
“Importantly, the driver doesn’t have to take any action as the switch happens automatically. Journey logs are held on the device and sent later, and pending updates are applied as soon as the train reconnects.
“Losing coverage affects how current your most recent update is. The driver will still receive advice calculated from the data the train is already holding. That distinction matters on a long regional run.”
Crossing loops are a standard feature of Australia’s interstate rail freight network, because much of the network is single track. So how does DAS work with train control instructions to enter crossing loops?
“I’ll explain the process that KiwiRail drivers routinely follow, since crossing loops are common in New Zealand and the DAS handling of these scenarios is well proven,” Mr Zink said.
“Crossing loops are shown and named on the DAS screen, so KiwiRail drivers can see the loop they are being directed into. When train control instructs a train into a loop, the driver uses the on-screen menu to set that loop as the target location. The advice profile is then automatically recalculated.
“On departure from the loop, the driver selects the route’s onward target and the journey continues with updated advice. The profile also recalculates by itself whenever the train stops and starts again.”
If waiting in the loop creates a delay, the driver can record the cause using on-screen menus to capture the exact location and time for later analysis. Where a delay is significant, DAS aims for the most efficient achievable arrival rather than insisting on the original plan to reach the destination.
“This is important because advice that assumes a schedule you can no longer achieve is advice a driver will soon stop trusting,” Mr Zink added.
Drivers are not compelled to follow the advisory guidance, so acceptance in the cab is what turns the technology into measurable fuel savings and network performance improvements.
“DAS is a driver aid, so the driver retains complete authority over the train. It doesn’t automate train handling, and it doesn’t replace each driver’s skill, route knowledge, or professional judgement.
“KiwiRail’s DAS driver champion was himself initially sceptical about the technology. He recently told our team that negative sentiment among his fellow drivers has largely disappeared, with utilisation of DAS being around 96 to 97 per cent.
“My advice is to engage with driver representatives early and be straight with them,” he said. “Explain the advisory nature of the system, and how the performance data will and won’t be used. It is one of the highest-value things an operator can do.”
After using DAS across New Zealand’s freight network for more than a decade, KiwiRail’s proven fuel reduction benefits are clear. For Australian operators who might be considering the technology, knowing how these fuel savings are measured and validated is important.
“Energy consumption baselines are initially established from the operator’s pre-deployment journey data where this is available, so future performance can be assessed against real operating history.
“Then for every journey, DAS calculates a baseline representing what would have been consumed without advisory guidance, for the same train, over the same route, against the same schedule. Actual consumption is then compared against that baseline.”
Zelra provides reporting at journey, driver, route, depot, and fleet level. This covers energy or fuel per kilometre, advisory compliance, and performance metrics such as on-time running. The gap between the profile actually achieved and the optimal profile calculated is recorded in the journey log.
“That last measure is particularly useful in a business case, because it quantifies the additional savings that can be achieved through improved compliance with DAS driving advice.
“Carbon is derived from the same consumption data, which matters for operators with emissions reporting requirements. KiwiRail has recorded a 15 per cent carbon emissions reduction as a separate measure alongside its significant ongoing fuel savings.”
Mr Zink’s advice to Australian operators was to contact Zelra today or to connect in person at AusRail.
“This year’s AusRail conference is in Brisbane, which is Zelra’s home town. It is the perfect opportunity to meet our team, so I encourage anyone interested in knowing more about DAS deployment to get in touch.”
This article was first published in Rail Express
Article
Freight Rail
Driver Advisory System (DAS)
Australia/New Zealand
6 minutes